Why A Clogged Hot Water Heater Must Be Addressed

A hot water tank can store a large amount of hot water. When it's time for the water to drain, the drain can, unfortunately, be clogged in some cases. This is most often the result of sediment. You can try to clear the clog yourself or contact a hot water tank service

Where the Sediment Comes From

Sediment arrives in your hot water tank from the incoming water supply. The process of heating the water causes the minerals to separate and settle at the bottom of your hot water tank. You will want to solve the sediment problem because it will cause your hot water heater to become less efficient and the device will break down over time. 

If your tank breaks down, this can lead to a leak that will be impossible to repair. As a result, you will need to replace the entire hot water tank. Therefore, you will want to solve the sediment and water heater clog as quickly as possible.

How To Safely Clear Your Hot Water Heater

To avoid any hazards when clearing out your hot water heater, make sure to disconnect it from the gas line and from the electrical power grid. Then, you'll need a garden hose so you can attach one end to the drain valve and have the other end release the water outside or into a drain.

You will want to open a faucet to allow air to escape from the tank. This will allow you to determine if the valve is running properly. As the water is draining from the tank, it will be clear if the valve is not clogged. You may discover that the water is not draining or is only partially draining. If this is the case, you will need to hire a hot water tank service to fix the clog.

Why Hire a Hot Water Tank Service

The water in the hot water tank is very hot, and you can burn yourself while servicing the hot water tank. In some cases, you will need to replace the entire hot water heater drain valve. If you are not able to drain the hot water heater, you might wonder how you can replace the hot water heater valve. The company will make sure to remove all the hot water from the tank while working on it so that only cold water will exit the drain to avoid accidents. 

Share